Before creating pipe networks from polylines, it is best practice to pre-process the polylines to ensure accuracy (no gaps between...

When analyzing stormwater or sewer networks in Autodesk Civil 3D using Devotech iDAS, you may encounter a situation where pipes with a...

If you print the pipe network profile views with the hydraulic and energy grade lines (HGL and EGL) turned off, you might see some lines...

To display flooded nodes in iDAS, follow these steps: Run the analysis (analysis must be successful) Go to the Reports - Node Flooding...

In some drawings, you may experience an issue where pipe network structures are visible in plan view but they are not visible in 3D view,...

We received a request to record a training video on how to define catchment properties for the EPASWMM runoff method in Devotech iDAS...

If there are question marks in the pipe network longitudinal section (profile view) instead of ground-level values, you need to set the...

If you import a new band set in the pipe network profile view, Autodesk® Civil 3D® resets the Data Source (under profile view...

If there are question marks in the pipe network longitudinal section (profile view) instead of station values, you need to set the...

Creating structures from COGO points is almost the same as creating structures from a CSV file, because the COGO points can be exported...

When you analyse the stormwater or sewer networks in Autodesk® Civil 3D® with Devotech iDAS, you may experience a spike at the beginning...

When importing pipe networks from an SHP file with the standard Civil 3D command, the pipe diameter mapping might not work the best....

The video below illustrates how to import new pipes to the part list from the catalogue. The workflow in the video can also be used for...

When you create plan production profile views, you might need to display the start and end structure names at the bottom of the profile...

We added improvements in the pipe networks' bill of materials in Autodesk® Civil 3D® that are part of Devotech iDAS 12.3. Depth groups...

Devotech iDAS automates many manual processes in Autodesk Civil 3D. One of them is automatically creating profile views for the entire...

To display the hydraulic (HGL) and energy (EGL) grade line values in the Autodesk® Civil 3D® profile view bands, you need to run the pipe...

When users want to import a network from Land XML to Autodesk Civil 3D, they need to specify the import settings. Use the Civil 3D...

Autodesk® Civil 3D® structure tables can only display limited properties of the connected pipes. The table excludes user-defined fields...

If you need to adjust Pipe Manager mapping every time you open the Pipe Manager then you might not have the write access to the following...